BLLPM - S-1 BLACK R.I.O INK, 1300559
- MSDS: BLLPM
- Manufacturer: DIAGRAPH CORP
- Product Name: S-1 BLACK R.I.O INK, 1300559
- National Stock Number: 7510-00N021076
Product Identification
Product ID:S-1 BLACK R.I.O INK, 1300559
MSDS Date:06/26/1991
FSC:7510
NIIN:00N021076
MSDS Number: BLLPM
Responsible Party
US
Emergency Phone: 618-997-3321
Info Phone: 618-997-3321
Preparer: W R MCILLEN
Cage: IO074
Contractor
Telephone: 618-997-3321
Cage: IO074
Ingredients
DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)
CAS: 123-42-2
RTECS: SA9100000
Fraction By Weight: 40-60%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM; 9192
PROPYLENE GLYCOL MONOMETHYL ETHER
CAS: 107-98-2
RTECS: UB7700000
Fraction By Weight: 20-40%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
ETHANOL, 2-(2-BUTOXYETHOXY)-; (DIETHYLENE GLYCOL MONOBUTYL
CAS: 112-34-5
RTECS: KJ9100000
Fraction By Weight: 0-20%
Hazards
LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: MAY CAUSE DERMATITIS &
IRRITATION. EYE: MAY CAUSE IRRITATION & BLURRED VISION. INHAL: MAY
CAUSE IRRITATION, DIZZINESS, FATIGUE, VOMITING, DIARRHEA. INGEST:
MAY CAUSE VOMITING, IRRITATION, & NAUSEA. CHRONIC: MAY CAUSE LIVER
& KIDNEY DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/ WATER FOR A MINIMUM
OF 15 MINUTES, CALL MD. INHAL: PROVIDE FRESH AIR & REST, CALL MD.
INGEST: DRINK SEVERAL GLASSES OF WATER, INDUCE VOMITING, CALL MD.
Fire Fighting
Flash Point Method:CC
Flash Point:97F,36C
Lower Limits:0.9%
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . A STRAIGHT STREAM OF WATER COULD SPREAD
FIRE.
Unusual Fire/Explosion Hazard:FLAMMABLE. A VAPOR ACCUMULATION WILL
FLASH &/OR EXPLODE IF IGNITED.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. ABSORB ON
INERT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE AWAY FROM ALL
SOURCES OF IGNITION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NEEDED TO KEEP VAPOR CONCENTRATION BELOW T.L.V. LEVEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLOTHING: USE AS NEEDED. OIL RESISTANT
FOOTWEAR.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOLAT (BY WT): 57.4.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:180F,82C
Vapor Density:HIGHER/AIR
Spec Gravity:0.9984
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:BLACK LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & CAUSTIC MATERIALS.
Stability Condition to Avoid:AVOID OPEN FLAMES & SPARKS.
Hazardous Decomposition Products:CO2, CO, HYDROCARBONS.
Disposal
Waste Disposal Methods:COMPLY WITH FEDERAL, STATE, AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.